← Back to blog
Training· 5 min read

How to Autoregulate Training: RPE vs Readiness Scores

By Mac Burke, qualified sports nutritionist


The short answer

Autoregulation means adjusting training to how you perform on the day. Use a readiness check before training to set the session, such as full load or 85%, and RPE during training to set each set, picking loads that leave 1-3 reps in reserve. RPE is the better-studied tool. Readiness adds context RPE can't see.

Autoregulation is a simple idea. Your strength changes from day to day, so your training should too. A fixed program says lift 100 kg for 5 on Tuesday whether you slept 8 hours or 4. An autoregulated program says pick the weight that feels like a certain effort today. RPE and readiness scores are two ways to do this. They work at different levels, so the best answer is usually to use both.

What is autoregulation in strength training?

Autoregulation means letting your performance on the day decide some of your training variables, usually load, sets or both. One early version, autoregulatory progressive resistance exercise (APRE), had athletes adjust the next set's weight based on how many reps they managed. In a 6-week study of 23 college football players, APRE improved bench press 1RM more than a traditional linear program (Mann et al., 2010).

The most common tools now are RPE based on reps in reserve, and daily readiness checks. Velocity tracking is a third option, but it needs a device on the bar.

How does RPE work for lifting?

The modern lifting RPE scale is based on reps in reserve (RIR), meaning how many more reps you could have done. RPE 10 means 0 reps left, RPE 9 means 1 left, RPE 8 means 2 left, and so on (Zourdos et al., 2016). In that study, RPE scores tracked bar speed closely: as lifters reported less in reserve, the bar moved slower.

To use it, your program gives a rep target and an RPE, such as 5 reps at RPE 8. You pick a weight you think leaves 2 reps in the tank. If the set feels easier than planned, add weight for the next set. If harder, take some off. The scale adjusts loads to match your ability set by set (Helms et al., 2016).

Does RPE training actually work better than percentages?

It works at least as well, and possibly a little better. In an 8-week study of 21 trained men doing squats and bench press three times a week, one group used fixed percentages of 1RM and the other picked loads to hit target RPE ranges. Both groups gained strength and muscle. The RPE group added 17.05 kg to their squat on average versus 13.91 kg for the percentage group, and the authors concluded RPE loading may give a small strength advantage for most people (Helms et al., 2018).

There is one catch. Rating reps in reserve takes practice. In the Zourdos study, experienced lifters rated a true 1RM closer to RPE 10 than novices did, which suggests they judge near-max effort better. If you're new, expect your RPE calls to be off by a rep or two for the first couple of months. Taking an occasional set to failure on a safe exercise, like a machine or dumbbell curl, helps you calibrate. For more on effort levels, see how close to failure you should train.

What does a readiness score add that RPE can't?

RPE only tells you how the bar feels once you're already lifting. It doesn't know you slept 5 hours, had a fight with your partner or have a big presentation tomorrow. A readiness check captures that before you start.

A 2016 systematic review of 56 studies found self-reported measures such as mood, stress and fatigue reflected changes in training load with better sensitivity and consistency than common objective measures like heart rate and blood markers (Saw et al., 2016). That makes a short questionnaire a reasonable way to set the plan for the day.

Readiness is also useful for decisions RPE can't make, such as whether to do the session at all, whether to cut a set from every exercise, or whether to swap heavy squats for a lighter variation.

RPE or readiness: which should you use?

Think of them as two layers:

  • Readiness sets the session. Before training, it decides the starting point: full plan, reduced load, fewer sets or rest.
  • RPE sets the sets. During training, it fine-tunes each weight so you land on the right effort.
  • Readiness catches outside stress and sleep. RPE catches how your body is actually performing.
  • Readiness needs a baseline of about two weeks to be useful. RPE needs practice to be accurate.

If you only pick one, RPE has more direct research behind it for strength outcomes. But the combination covers the gaps in each.

How do you combine RPE and readiness in a session?

Here is a simple way to run it:

  • Step 1: do a quick readiness check. Score sleep, soreness, stress, energy and mood 1-10.
  • Step 2: if your total is near your normal, start at the planned load. If it is clearly below, start at about 85-90% of planned load or cut one set per exercise.
  • Step 3: on your first working set, rate the RPE. If it lands on target, keep going. If it is 1 or more points higher, drop the load about 5%. If lower, add a little.
  • Step 4: log the readiness score, loads and RPE so you can see patterns over weeks.

The second layer protects you if the readiness check was wrong. A low score with a great first set means you can work back up. A high score with a grinding first set means you back off anyway.

The MBM app, launching soon, handles steps 1 and 2 for you. Its daily readiness check-in scores sleep, soreness, stress, energy and mood, then gives a load suggestion such as starting at 85%, inside structured programs you follow on the day.

What mistakes do people make with autoregulation?

  • Using it as an excuse. Feeling a bit flat isn't a reason to train at 60% every day. Most days should run as planned.
  • Sandbagging RPE. Calling a set RPE 8 when you had 5 reps left means you're training too light.
  • Ignoring trends. One low readiness day is noise. A week of low scores means something needs to change, such as sleep, food or overall training volume.
  • Changing everything at once. Adjust load first. Only cut sets or skip sessions when scores are clearly low.

Common questions

Is RIR the same as RPE?

They describe the same thing from different ends. RIR counts reps left in the tank, and the lifting RPE scale converts that to a 1-10 score, so RPE 8 equals 2 RIR. Use whichever you find easier to think in.

Can beginners use autoregulation?

Yes, but simply. Beginners improve almost every session, so a basic plan with small weight increases works well. Use RPE loosely, aiming for sets that end with 2-3 reps left, and use readiness mainly to spot poor sleep or high stress.

Does autoregulation work for fat loss phases?

It is especially helpful in a calorie deficit, when energy and strength swing more from day to day. Holding effort steady with RPE lets you keep training hard enough to keep muscle without forcing numbers you can't hit.

What is velocity-based training?

Velocity-based training uses a sensor or camera to measure bar speed and adjust load when the bar slows. It is accurate but needs equipment. RPE gives you a free approximation, since perceived effort and bar speed track closely.

Sources

  1. Mann et al. (2010), Journal of Strength and Conditioning Research - APRE vs linear periodisation in college athletes
  2. Zourdos et al. (2016), Journal of Strength and Conditioning Research - RPE scale measuring repetitions in reserve
  3. Helms et al. (2016), Strength and Conditioning Journal - Applying the RIR-based RPE scale
  4. Helms et al. (2018), Frontiers in Physiology - RPE vs percentage 1RM loading
  5. Saw et al. (2016), British Journal of Sports Medicine - Subjective self-reported measures trump objective measures
Work with Mac

Ready to apply this to your own program?

MBM builds 1:1 coaching programs around the exact principles above - weekly check-ins, weekly adjustments, and a plan that fits your life.

Keep reading

← More posts on the MBM blog